Pool Monitoring

The pool view provides detailed monitoring and control for all devices within a pool.

pH Gauge

At the top of the page, a pH gauge displays the current pH reading from the master device. The gauge is color-coded:

• Green zone (7.2–7.6) — pH is in the optimal range
• Red zone — pH is too low or too high

The master device name is shown below the gauge.

Device Cards

Each device in the pool is shown as a card with real-time information:

Master Device:

• Device name with MASTER badge
• Online/offline status (green or red indicator)
• Current pH reading (color-coded)
• CO₂ tank pressure in bar
• Mode — Auto or Manual
• CO₂ status — On (injecting) or Off

Slave Devices:

• Device name with role badge
• Online/offline status
• CO₂ status — Injecting or Standby
• Mode — Auto or Manual
• Pump pressure (P1) with status indicator
• CO₂ cylinder pressure (P2) with status indicator

Group Controls

Each device group has expandable controls for managing devices:

Bulk Controls (apply to all devices in the group):

• Mode toggle — Switch all devices between Auto and Manual mode
• CO₂ Solenoid — Turn CO₂ injection on or off for all devices

Individual Device Controls:

• Mode toggle — Auto/Manual per device
• Solenoid toggle — On/Off per device

Telemetry Chart

Below the device cards, a historical telemetry chart shows pH and pressure data over time. This helps identify trends and verify that the system is maintaining the correct pH range.